In-situ Test Subs
TIS pressure in-situ test subs are installed between the lower lubricator section and the wireline valve and are designed to significantly reduce operating costs, by removing the need to pressure test with glycol before every wireline run. After the initial pressure test of the complete pressure control package, the tools are changed out via the special TIS acme, secondary quick union connection on the pressure test sub. The secondary quick union connection has stepped seal bore diameters complete with o’ ring seals and an injection port, that allows the union to be externally pressure tested. Due to the small volume of fluid required, testing of the secondary union can be carried out with a hand pump.
Options
The TIS pressure test sub range is available with the following options :
- 3.00” ID to 9.00” ID through bores
- Standard or sour service
- 5,000 Psi, 10,000 Psi and 15,000 Psi, working pressures
- Service temperature range of -29 to +121 °C
- Choice of primary quick union connection
Technical Features
- TIS pressure test subs have an isolation valve built into the injection manifold, allowing the operator to shut off the port after testing. This safety feature prevents well pressure from migrating to the hand pump, in the event of an o'ring failure
- The injection manifold also has a TIS swivel union, which allows the operator to place the hose neatly to the best operating position
In-situ Lift/Test Caps
| Size | Working Pressure | Safe Working Load | Part Number |
|---|---|---|---|
| 3" | 10,000 psi | 5 Ton | 0044-00024-TIS |
| 4" | 10,000 psi | 5 Ton | 0044-00025-TIS |
| 5-1/8" | 10,000 psi | 5 Ton | 0044-00005-TIS |
| 6-5/8" | 10,000 psi | 5 Ton | 0044-00003-TIS |
In-situ Test Subs : 5,000 & 10,000 psi
| Thro' Bore | Working Pressure | Quick Union | Part Number |
|---|---|---|---|
| 3.00" | 5,000 psi | 5-1/2" - 4x2 'B' Type | 0044-00008-TIS |
| 3.00" | 5,000 psi | 5" - 4Thd 'O' Type | 0044-00009-TIS |
| 3.00" | 10,000 psi | 6-5/16" - 4Thd 'B' Type | 0044-00010-TIS |
| 3.00" | 10,000 psi | 5-3/4" - 4Thd 'O' Type | 0044-00011-TIS |
| 4.00" | 5,000 psi | 7" - 5Thd 'B' Type | 0044-00012-TIS |
| 4.00" | 5,000 psi | 6-1/2" - 4Thd 'O' Type | 0044-00013-TIS |
| 4.00" | 10,000 psi | 8/14" - 4x2 'B' Type (10k) | 0044-00014-TIS |
| 4.00" | 10,000 psi | 8-3/4" - 4Thd 'O' Type | 0044-00015-TIS |
| 5-1/8" | 5,000 psi | 8-1/4" - 4x2 'B' Type | 0044-00016-TIS |
| 5-1/8" | 5,000 psi | 8-1/4" - 4Thd 'O' Type (5k) | 0044-00017-TIS |
| 5-1/8" | 10,000 psi | 8-7/8" - 4x2 'B' Type | 0044-00018-TIS |
| 5-1/8" | 10,000 psi | 9" - 4Thd 'O' Type | 0044-00004-TIS |
| 6-5/8" | 5,000 psi | 9-7/8" - 4x2 'B' Type | 0044-00019-TIS |
| 6-5/8" | 5,000 psi | 9-1/1" - 4Thd 'O' Type | 0044-00020-TIS |
| 6-5/8" | 10,000 psi | 13" - 4Thd 'B' Type | 0044-00021-TIS |
| 6-5/8" | 10,000 psi | 11-1/2" - 4Thd 'O' Type | 0044-00002-TIS |
Links & Specs
t: +44 (0) 1224 775277 | f: +44 (0) 1224 729426 |
e: sales@tis-manufacturing.com
Kirkhill Place | Kirkhill Industrial Estate | Aberdeen AB21 0GU | UK
